Equipment

Modern equipment is one of the competitive advantages of Dalzavod. We constantly update our metal processing and welding equipment. Most our equipment made in EU and Japan.

Modern equipment and advanced software facilitate to optimize time, improve the production quality and increase our competitiveness.

The following equipment should be emphasized:

  • Maxigraph Plasma Cutting Machine 4000DD produced by KOIKE, Japan;
  • Contour band machines Transverse 610.440 produced by Bomar, Czech Republic;
  • Semi-automatic welding machine Fastmig KMS 400 produced by Kemppi, Finland;
  • Welding station Mech Trac 3 000 and two automatic welding machine A2 Multitrac produced by ESAB, Sweden.

We conduct VT, UT, RT and MT. We use ISONIC 2010 defect detector produced by SONOTRON NDT, Israel to perform ultrasonic testing and ICM SITE-X 3605, Sarma-300 and Sarma-500 x-ray detectors for radiographic testing.

Type of work Name of work Features Number
Cutting Portal Plasma and gas cutting MAXIGRAPH 4000DD The thickness of the cutting (plasma) – 0, 4 – 64 mm., cutting speed – 4500 mm. per minute (for a thickness of 10 mm.), the maximum width – 3100 mm. The maximum length of – 10 to 500 mm. The maximum thickness of the gas cut – 300 mm. 1
Plasma Cutting Machine CUT-100 The thickness of the cut – 40 mm. 1
gas cutting machine CG-100 The thickness of the cut – 300 mm. 2
Bandsaw Transverse 610.440 DGH Maximum Height: 780 mm. 2
welding The machine TIG welding KEMPPI Master TIG MLS 3000 AC / DC 300A 2
The machine semi-automatic welding KEMPPI Fast MIG KMS 400 400A 42
Inverter Welding Huayilong MIG-500 PT 500A 19
Welding machine ESAB Multitrac A2 1000A 2
Automatic submerged arc welding EVO SAW 1000 – II 1000A 2
The welding tractor ESAB MechTrac 3000 1000A 1
The welding carriage NOBORUDER 2
Welding semiautomatic Panasonic YD – 500 GR 3 500A 2
Lifting Equipment (Cranes, forklifts, trucks) Carts rail Capacity 95 tons 2
Overhead Crane (shop) Capacity 20 tons 3 (the work of two cranes in SPARK)
Overhead Crane (shop) Capacity 20 tons 2
Overhead Crane (shop) Capacity 16 tons 1
Overhead Crane (shop) Capacity 5 tons 3
Floating crane Payload 100 tons 1
Trucks Load 200 kg. 1
Forklift 3 tons 1
Forklift 1 tonne 1
gantry crane Capacity 20 tons 2 (the work of two cranes in SPARK)
Accessories Winch Capacity 5 tons 5
Tal Capacity 5 tons 10
Jack Capacity 50 tons 5
The equipment for cleaning and painting shot blasters Protech SC 220 The volume = 220l. 3
The unit airless GRACO XTREME 60: 1 3
Compressor ROLLAIR 75 BM IP 55 “Worthington” 9.5 bar, 580m3h 2
Heater Air JUMBO SP 200 Thermal power – 230 kW 6
Dehumidifier MUNTERS MOD MA 2500 2500 m3h 3
The equipment nondestructive testing X-ray machine ICM SITE – XD 3605 120-360 kW 1
X-ray machine Sarma-500 500 kW, the maximum thickness – 80 mm. 1
Ultrasonic Flaw ISONIC 2010 50-20000 mm. 1
Ultrasonic thickness gauge UT-111 thickness 0,6-500 mm. 1
Ultrasonic Flaw UDZ-71 0,4 ​​- 15 MHz 1
Magnetic Flaw DA-200S Parker 4 A 1
Magnetic Flaw Detector B-100S Parker 3 A 1
magnetometer to control the magnetic field IMAG-400 The measurement range, A / cm (mT) 1-700 (0,1-88) 1